Resins
Stone Stop Wet Look
Natural Stone Wet Look Resin
It is a special resin with water-repellent properties, used to protect the colors of natural stone, walls, floors and other hard porous materials and to prevent them from getting stained, and revives the colors of the surface on which it is applied by ensuring that the surface has a constantly wet appearance.
It can be used on a wide variety of surfaces such as floors and walls, cladding, facades, countertops, verandas, driveways and garages, kitchens, entertainment areas, all types of natural stone, clay, terracotta tiles, brick, concrete, terrazzo.
It is suitable for both indoor and outdoor use.
The product should always be tested on a small area first and a 24-hour curing period should be waited to check the results. Any substance, dust, dirt and oil that prevents adhesion on the surface should be cleaned and there should be no loose and loose particles. The product should be applied to every part of the surface with a paint roller, clean brush or sponge. At least 30 minutes should be waited for the product to penetrate the surface and then excess product residue should be cleaned thoroughly with a clean and dry cloth. The product should be left to cure for at least 1 hour and if desired, another coat should be applied. Contact with water should be avoided for at least 8 hours after application.
Features and Benefits
Provides a vibrant and wet appearance to the surfaces it is applied to. Protects against staining thanks to its superior oil and water repellency.
It is long lasting.
It is easy to apply.
In the future, it can be re-applied without peeling the applied surface.
It does not flake, yellow, crack, swell or break. Water vapor penetrates freely, preventing moisture accumulation inside the material.
Does not collect dust.
