Our Products
Application Methods
Taşstop floor systems can be applied with various application methods according to different surface needs. The pouring method, which is one of the most preferred methods, ensures that gravel and resin are spread evenly on the surface. The spraying method is used especially in surface protection or final coat applications; while the mixing method is ideal for the homogeneous combination of stone and binder. The pumice method, which is preferred for light-structured floor applications, offers more permeable and natural-looking results. Each application technique provides special advantages according to the area of use and project needs.
Ground Preparation
For the durability of the application, the surface must be clean, dry and solid. Correct ground preparation directly affects the performance of the system.
Stone and Resin Selection
Choosing the appropriate size stone and the right resin for the application area is critical for both aesthetic and technical success.
Mixing Method
Stone and resin are mixed by machines or manually to obtain a homogeneous mixture. It is the best method for a solid floor. It should be used in areas with pedestrian use.
Spraying Method
Stone Stop resin is applied evenly to the ground using special spraying equipment on the stones on the surface.
Pouring Method
The resin is applied by pouring it onto the stones on the surface. It is the most preferred method to obtain balanced distribution and smooth surfaces.
Pumice Method
It ensures that pumice stones, which can crumble over time and become difficult to clean, are firmly fixed to the surface. This system both prevents the stones from moving and contributes to the surface being easy to clean.